You can get inaccurate home blood sugar readings if you test with unwashed or wet hands, use damaged strips or collect too little blood. Testing at inconsistent times can also make results difficult to compare. An unexpected number may reflect a genuine change in glucose rather than a faulty meter, so check your technique without delaying treatment for symptoms of low blood sugar.
Can unwashed or wet hands affect blood sugar readings?
Sugar from fruit, sweets or other food on your fingertips can mix with your blood sample and produce a falsely high result. Even a small amount of residue can affect the reading because your meter uses a tiny drop of blood.
Wash and dry your hands before every finger-prick test. Use soap and water, rinse well and dry with a clean towel. Water left on your skin can dilute the sample and affect the result.
Don't rely on a quick wipe or hand sanitiser to remove food residue. If you use an alcohol swab, let your skin dry completely before pricking your finger. After handling sugary food, wash your hands rather than simply wiping away the first drop of blood.
How do you check your meter and test strips?
Test strips contain chemicals that react with glucose. They can become unreliable after their expiry date or through exposure to moisture, excessive heat or incorrect storage, even if they look normal. The US Food and Drug Administration explains that your equipment, supplies and testing technique can affect results.
- Use only strips approved for your exact meter model, and check their expiry date.
- Close the strip container immediately after removing a strip; keep individually wrapped strips sealed until you need them.
- Store your meter and strips within the temperature and humidity limits in their instructions, away from direct sunlight.
- Check the battery, strip port and display, and clean your meter only as the manufacturer directs.
Some strips expire sooner once you open the container. Write the opening date on the container if the instructions require it. If your meter requires a code, check that it matches the strip batch.
Use the manufacturer's control solution as instructed, particularly after dropping your meter or getting repeated unexpected results. This checks whether your meter and strip work together within the stated control range. It doesn't measure your blood sugar or replace a comparison with a laboratory test.
How should you collect a blood sample?
If you use too little blood, wait too long to apply it or press the strip against your skin incorrectly, you may get an error message or an unreliable result. Follow your meter's instructions rather than assuming every model works the same way.
- Wash and dry your hands, then gently warm your fingers if they're cold to improve blood flow.
- Insert a fresh strip as directed and wait for your meter's ready signal.
- Use a fresh lancet on the side of a fingertip, at a depth that produces a suitable drop.
- Let a drop of blood form, using gentle pressure if needed rather than squeezing your fingertip forcefully.
- Touch the strip's sampling edge to the drop and let it fill as instructed.
Don't smear blood onto the strip or add more after the test starts unless your device specifically allows it. Never reuse a strip. Forceful squeezing can mix tissue fluid with your blood sample and distort the result.
If your meter allows you to test on your forearm or another alternative site, check its restrictions. Use a fingertip sample when you suspect low blood sugar, when your symptoms don't match the result or when your glucose may be changing rapidly, such as after food or exercise.
When should you check your blood sugar?
Even an accurate reading can mislead you if you record or compare it incorrectly. You can't directly compare a fasting result with one taken soon after a meal. Follow your clinician's testing schedule and record the time, when you ate, your activity and any relevant symptoms.
For a fasting test, you'll usually need to avoid food and calorie-containing drinks for at least eight hours; you can drink plain water. For an after-meal check, you usually start timing from the first bite of food, not when you finish eating. Ask your diabetes team how long after that you should test.
Exercise, stress, illness, poor sleep and missed or delayed medicines can genuinely change your blood sugar. Some medicines and supplements can also interfere with particular meters. Check your device leaflet and ask your pharmacist or diabetes team about possible interference rather than stopping prescribed treatment yourself.
Why do meters, sensors and laboratory tests give different results?
You can use a home meter to monitor your blood sugar, but you shouldn't expect it to match a laboratory result exactly. Finger-prick and venous blood samples can give different results, especially after food. Your glucose can also change in the time between the two tests.
To compare results, take your meter to an appointment and ask how to test as close as possible to the time of your laboratory blood collection. Ask your clinician to assess any repeated differences. Also check the units: mg/dL and mmol/L use different numerical scales.
A continuous glucose monitor measures glucose in fluid beneath your skin rather than directly in your blood. Its reading can lag behind your blood glucose when levels change quickly. Follow your sensor's instructions on confirming unexpected readings with a finger-prick test.
What should you do about an unexpected blood sugar reading?
If you feel well but a result seems unlikely, wash and dry your hands and repeat the test once with a fresh strip. Record both results. If you keep getting unexpected results, use control solution as directed and contact your diabetes team or the manufacturer. Don't keep testing until you get a number you prefer.
Don't delay treating low blood sugar while checking your equipment. You generally need to act promptly if your reading is below 70 mg/dL. If you're awake and can swallow, follow your prescribed plan; the National Institute of Diabetes and Digestive and Kidney Diseases advises taking 15 to 20 grams of fast-acting carbohydrate and rechecking after 15 minutes.
Seek emergency help if you or someone else has seizures, severe confusion or difficulty swallowing, or loses consciousness. Never give food or drink by mouth to someone in these situations. Get urgent medical assessment if you have a very high reading with vomiting, abdominal pain, deep breathing or drowsiness. Follow your sick-day and ketone-testing plan, and don't take extra medicine beyond your prescribed correction instructions.
Sources
- Blood Glucose Monitoring Devices · FDA (fda.gov)
- Low Blood Glucose (Hypoglycemia) · NIDDK (niddk.nih.gov)